From Lynx Studio Technology
The LM-A24 and LM-A4 are specialty analog modules that provide line-level I/O on TRS connectors. Designed to the same exacting standards Lynx converters are known for, they offer pristine transparency, excellent imaging, and ruler-flat frequency response.
These modules provide an excellent solution for installations requiring a small number of dedicated I/O’s without the requiring an additional break-out cable. They also offer I/O levels up to +24dBu for extended compatibility with other pro studio equipment. An excellent example application is providing separate monitor outputs when other Aurora(n) line outputs are being fed to a summing mixer or to a patchbay for inserts.
The outputs can easily drive powered monitors and offer precise level control via a low-distortion, digitally-controlled analog attenuator. This analog-domain attenuator maintains a high signal-to-noise ratio over the adjustment range. Monitor speaker protection is provided by output anti-pop relays.
Input trims, output levels, signal routing and mixing are easily controlled from the Aurora(n) front panel or using Lynx’s NControl application on any Windows or Mac computer.
These modules are user-installable either in the top position of module 1 or below the LT-USB or LT-TB3. For Dante and ProTools HD connection methods the LM-A24 or LM-A4 must be installed in the top position of module 1.
Key features
- Lynx proprietary 24-bit A/D and D/A conversionFour electronically balanced outputs on TRS
- Output level adjustments in 0.5dB increments up to +24dBuTwo electronically balanced inputs accept levels up to +24Bu on TRS (LM-A24 only)
- Fully-differential transparent designLine level performance identical to LM-AIO8E
- Anti-pop relays on outputs for silent power-ups and -downsSeamless integration with Aurora(n)’s mixing and routing engine
LM-A4
The output-only LM-A4 is an excellent companion to the four-channel LM-PRE4 input-only module. The combination of these two modules allows for the configuration of a lower cost 4-in/4-out Aurora(n) which is ideal for smaller studios and podcasters.
LM-A24
Featuring two analog inputs and four analog outputs, all on Balanced 1/4″ TRS jacks, the LM-A24 is the perfect addition to your 8, 16 or 24 channel Aurora(n). The two analog inputs are switchable between +20 dBu and +24 dBu, making them more compatible with other professional equipment (mic pres, etc.). Outputs are identical to the LM-A4 module.
Line In (includes A/D Conversion) (LM-A24 only)
- THD+N
- -113dB @1kHz, -1dBFS, 20kHz filter, +20dBu trim
- Dynamic range
- 119dB, A-weighted, -60dBFS signal method
- Frequency response
- ±0.010dB, 20–20kHz
- Crosstalk
- -130dB maximum @ 1kHz, -1dBFS signal
- Common mode rejection
- greater than 80dB
- Full-scale trim settings
- +20dBu, +24dBu
- Connection
- Electronically Balanced TRS
Line Out (includes D/A Conversion)
- THD+N
- -108dB @1kHz, -1dBFS, 20kHz filter, +20dBu FS setting
- Dynamic range
- 120dB, A-weighted, -60dBFS signal method
- Frequency response
- ±0.025dB, 20–20kHz
- Crosstalk
- -130dB maximum @ 1kHz, -1dBFS signal
- Output level
- -71.5dBu to 24dBu, adjustable in 0.5dB increments in the analog domain
- Connection
- Electronically Balanced TRS
Free 3-Year Warranty
Sound Pure stands behind our products. Free three-year warranty on this item. Coverage exclusions live in Terms & Conditions, Section 27.
Level of support and expertise that simply isn't available at big-box megastores. Read the warranty →
Returns
Not eligible for Try Before You Buy or the 48-hour approval period. Standard return policy applies — see Terms & Conditions, Section 18 for details.
You may also like
Browse PCIe/Interface Option Cards →
Recommended accessories
Sound Pure Studios · Durham, NC
Come hear it in our control rooms.
Sound Pure is a working studio in Durham, NC — a 1,000 sq ft live room and two pro control rooms. Book a session to audition gear in a world-class acoustic space before you buy.